In only 30 minutes get a 100% biosafe Municipality approved 4 process disinfection
for your studio.
Duration: 30 mins.
What is included for four (4) Process?
Our professionals will bring all necessary materials for sanitation & disinfection purposes (spraying machine, sanitizing solution, microfiber cloths, mask, overalls, gloves, and shoe covers) – a power outlet might be required to connect the machine.
1. Misting – All surfaces are then sprayed mist with the sanitization solution and left to for 5 minutes to dissolve and get absorbed within the surface – no rinsing or wiping is required.
2. Wiping – The second step is to wipe all wet areas where the sanitizer was sprayed if the client prefers.
3. Fogging – The third step – all surfaces sprayed smoke fog are then Release antibacterial name particles and fumigate the air within seconds Effective at reducing air-borne contaminants. Effective at disinfecting hard to reach areas Fog can kill mosquitoes, flies, biting flies, gnats inside the house.
4. UVC lights – The fourth step – service important during pandemic period. Light and ozone feature together like we have wider spot in our home, offices like under the table, under back of chair that sort of
thing you will need the ozone Gas to reach and disinfect. Those areas in order to completely sterilize the place. Do remember however that it is harmful to inhale ozone which is why we have to ventilate the room, after operating the UVC device and people should stay away while doing so.
The solution is a mixture of water and disinfectant and is safe to use around
children, pets, and on all surface types.
• Bio – Safe for kids and Pet
• EPA registered
• Dubai Municipality approved
• Hospital-grade disinfectant
• Kills 99.999% of bacteria and viruses
• No-rinse or wipe required as it breaks down into simple salt-producing no harmful by-products
• Do a round of cleaning or cover all valuable paintings
right before the disinfection.
• All food left outside should be covered and placed in the fridge
• For 1st step process Misting All windows and doors should be closed
• and AC turned off during the process as well as 15 – 20 minutes after the sanitization session is completed.
• All Fire Smoke detector should be cover before the disinfection specially the 3rd processes using Air disinfection Smoke Fugger. All windows and doors should be closed
• For UVC light procedure must be no plants and animal inside during the process as well.
• After Ultraviolet light process is done. Just ventilate the room by opening the windows or door about 30 mins. Or so until the smell of the ozone is no longer present.
• Do a disinfection service after 2 weeks.After 60 Minutes later your room or offices free of viruses.